사용자 도구

사이트 도구


음향:industrial_standards:itu:start
[공지]회원 가입 방법
[공지]글 작성 및 수정 방법

차이

문서의 선택한 두 판 사이의 차이를 보여줍니다.

차이 보기로 링크

양쪽 이전 판이전 판
다음 판
이전 판
음향:industrial_standards:itu:start [2024/03/07] – ↷ 문서가 음향:industrial_standards:itu에서 음향:industrial_standards:itu:start(으)로 이동되고 이름이 바뀌었습니다 정승환음향:industrial_standards:itu:start [2024/03/07] (현재) 정승환
줄 9: 줄 9:
 https://www.itu.int/en https://www.itu.int/en
  
-=====ITU-R BS.562.3=====+=====ITU-R=====
  
-**Subjective assessment of sound quality음질에 대한 주관적인 평가**+  BO Satellite delivery 
 +  BR Recording for production, archival and play-out; film for television 
 +  * BS Broadcasting service (sound
 +  * BT Broadcasting service (television) 
 +  * F Fixed service 
 +  * M Mobileradiodetermination, amateur and related satellite services 
 +  * P Radiowave propagation 
 +  * RA Radio astronomy 
 +  * RS Remote sensing systems 
 +  * S Fixed-satellite service 
 +  * SA Space applications and meteorology 
 +  * SF Frequency sharing and coordination between fixed-satellite and fixed service systems 
 +  * SM Spectrum management 
 +  * SNG Satellite news gathering 
 +  TF Time signals and frequency standards emissions 
 +  V Vocabulary and related subjects 
  
-"라우드 스피커 질에 대한 주관 평가를 위해서는 80dB~90dB 의 청취 레벨을 권고한다."는 내용+{{namespace>향:industrial_standards:itu}}
  
-<WRAP center round box> 
-6 Sound level 
  
-6.1 Loudspeaker reproduction  
- 
-When using a wanted signal of high peak level, the sound level should be measured with a sound level meter with no weighting and the “slow” time constant standardized by the IEC (Publication 123). For other signals, and for measuring room noise, the level should be measured with a sound level meter with weighting A and the “slow” time constant standardized by the IEC (Publication 123). For measurement of the sound level of a programme sequence in the special conditions of the test and at a given position in the listening room, the sound level will be taken by definition as equal to the maximum value shown by the sound level meter during each sequence. **In case of assessments of high-quality high-level signals, a listening sound level of 80 to 90 dB should be used.** 
-</WRAP> 
-  
- 
-{{ :음향:industrial_standards:r-rec-bs.562-3-199006-w_pdf-e.pdf |}} 

[홈레코딩 필독서]"모두의 홈레코딩"구매링크


음향/industrial_standards/itu/start.1709817332.txt.gz · 마지막으로 수정됨: 2024/03/07 저자 정승환