사용자 도구

사이트 도구


음향:industrial_standards:smpte:start
[공지]회원 가입 방법
[공지]글 작성 및 수정 방법

SMPTE

Society of Motion Picture and Television Engineers

미국. 영화ㆍ텔레비전 엔지니어 협회

https://www.smpte.org/

SMPTE RP200

SMPTE Recommended Practice - Relative and Absolute Sound Pressure Levels for Motion-Picture Multichannel Sound Systems — Applicable for Analog Photographic Film Audio, Digital Photographic Film Audio and D-Cinema

Abstract
This practice specifies a measurement method and wideband sound pressure levels for motion-picture dubbing theatres, review rooms, and indoor theatres using steady state wideband pink noise methodology. Together with SMPTE ST 202, it is intended to assist in standardization of reproduction of motion-picture sound in such rooms.

이 규정은 영화 더빙 극장, 리뷰 룸 및 실내 극장에서 지속적인 와이드 밴드 핑크 노이즈 방법론을 사용하여 측정 방법과 와이드 밴드 소음 압력 레벨을 명시합니다. SMPTE ST 202와 함께 사용되어, 이러한 공간에서 영화 음향 재생의 표준화에 도움을 줄 것으로 기대됩니다.

스피커라우드니스 셋팅에 대한 SMPTE 표준

Reference

SMPTE ST202

SMPTE Standard - Motion-Pictures — Dubbing Theaters, Review Rooms and Indoor Theaters — B-Chain Electroacoustic Response

Abstract
This standard specifies the measurement methods and characteristic electroacoustic frequency response of the B-chain of motion-picture dubbing theaters, review rooms, and indoor theaters whose room volume exceeds 150 m3 (5297 ft3). It is intended to assist in standardization of reproduction of motionpicture sound in such rooms. It does not apply where the recorded sound is intended for reproduction under domestic listening conditions, i.e., for radio broadcasting, television broadcasting, tape, or disc. This standard does not cover that part of the motion-picture sound system from the transducer to the input terminals of the main fader, nor does it cover the electroacoustic response characteristic of motion-picture theater subbass loudspeakers (subwoofers).

이 표준은 영화 더빙 극장, 리뷰 룸 및 실내 극장의 B-체인의 측정 방법과 특성 전기음주파수 응답을 명시합니다. 이들 공간의 방체가 150m3 (5297ft3)를 초과하는 경우에 해당합니다. 이는 해당 공간에서 영화 음향 재생의 표준화에 도움을 주기 위한 것입니다. 이 표준은 라디오 방송, 텔레비전 방송, 테이프 또는 디스크 등 가정에서 청취되는 조건으로 음향이 재생될 경우에는 적용되지 않습니다. 또한, 이 표준은 변환기부터 주요 페이더의 입력 단자까지의 영화 음향 시스템의 부분과 영화 극장 서브베이스 스피커(서브우퍼)의 전기음향 응답 특성을 다루지 않습니다.

Timecode

SMPTE Timecode

여러 대의 비디오, 오디오 기기를 동기화 시키기 위한 방법이다.
SMPTE는 Society of Motion Picture and Television Engineers의 줄임 말이다

형식

HH:MM:SS:FF hour:minute:second:frame

동기화

주로 영상과, 오디오의 동기화를 위해서 사용된다. 예를 들면 영화 장면 등을 찍을 때, Timecode 제너레이터를 이용해 카메라로 영상을 찍을 때 Timecode를 기록하고, 따로 오디오 레코더에도 같은 Timecode를 기록하여 나중에 NLE에서 영상과 오디오를 불러와서 Timecode를 기준으로 정렬시키면 영상과 오디오가 쉽게 동기화 된다.

아래와 같은 Timecode 제너레이터는 슬레이트의 기능을 하기도 한다.1)

오디오에서는 테이프 레코더 나 멀티 트랙 레코더믹스 콘솔, MIDI Sequencer 등과 동기화2)시켜서 같이 동작시킬 수 있다. 3)

영상 촬영 제작 현장에서 Timecode 는 왜 사라지는가?

LTC

LTC(Linear Timecode) : 오디오 신호의 형태로 동기화되는 Timecode. 일반 영상 장비에 사용

영상 장비와 오디오 장비를 동기화 시킬 때 주로 사용한다.

MTC

MTC(MIDI Timecode) : MIDI 케이블을 통해 MIDI 신호의 형태로 동기화 되는 Timecode

MIDI 장비와 오디오 장비를 동기화 시킬 때 주로 사용한다.

무선 Timecode

최근 Tentacle 이나 Deity 같은 회사에서 무선 Bluetooth를 통해 싱크가 가능한 무선 Timecode 기기를 내놓았다. 기존에는 Timecode를 사용하기 위해서는 유선(BNC나 3.5mm 케이블)으로만 사용이 가능 했기 때문에, 사용이 꺼려지는 요인이 되었으나 무선은 그런 단점이 제거 되었다.

여러 개의 Timecode 유닛들의 TimecodeBluetooth를 통해 동기화 하여 카메라의 Timecode 인풋에 입력시킨다. Timecode 인풋이 없을 때는 그냥 오디오 트랙녹음을 받으면 된다.4) 유닛들의 Timecode를 동기화 할 때만 bluetooth를 사용하기 때문에, 동기화 시킬 때에는 근거리에서 Bluetooth로 동기화 시키고, 동기화 된 후에는 거리에 상관없이 사용할 수 있다.

SMPTEGenerator

Cubase 내장 플러그인

오디오 채널플러그인으로 인서트하여 해당 오디오 채널출력으로 SMPTE Timecode(LTC)를 출력해준다.

유저위키의 모든 컨텐츠는 홈레코딩 위키에 등록된 사용자에 의해 만들어진 컨텐츠입니다.

1)
측면에 Timecode 출력이 있어 카메라와 연결한다.
2)
오토메이션, 펀치 녹음 등에 사용
3)
하지만 지금은 DAW 하나로 레코더시퀀서, 믹싱 콘솔이 다 통합되어 사라져가는 추세…지만 아직 많이 쓰임
4)
Deity 의 경우에는 스테레오 트랙의 한쪽에는 Timecode, 나머지 한쪽에는 자체 마이크를 통한 Scratch 오디오녹음 받을 수 있다.
로그인하면 댓글을 남길 수 있습니다.
검색
[홈레코딩 필독서]"모두의 홈레코딩"구매링크


음향/industrial_standards/smpte/start.txt · 마지막으로 수정됨: 2024/03/07 저자 정승환